Description

AKT- V4 BUBBLE REMOVER

Features

• Easy to use
• Simply Push One Button to Complete Both the Laminating Process and the Bubble removal process.
• Work for LCD screens up to 11.5 inches.
• Stable Performance. The Motor is imported from Germany to keep the vacuum pressure lever stable and for working a long time.
• Oil water self-cycle system, reduce the problem of the solenoid, prolong the service life of the machine
• This machine is useful for you considering your phone repair  and refurbishment business
• The OCA bubble remover machine is good and helper to assists you in fixing cell phones perfectly in a short time
• Very smooth remover machine and this machine remover all types of (Lcd, Glass, tab, and all types of mobile models) removed bubbles.
• This machine is easy to use and profitable also
• The machine is designed to sniff out any invisible bubble and conduct an automatic cleansing after lamination
• It is easy to explode to cause a low safety factor
• This machine occupies ordinary bubble remover machine
• It is longer than that of common bubble remover
• 9 Inches thick gate and best quality rubber prove the safety and keep reliable
• We can provide stable quality and long service life
• Suitable for small mobile Phone Repair Shops to repair or refurbish LCD screens of mobile phone
• This machine especially used to rubber and design a new safety door
• This machine has all parts strict and inspection provided for you
• In this machine 2 meter is available (Timer meter and temperature meter)
• V4 in this machine without outer lock In this machine internal locker is available
• The machine is for assembling LCD screens and digitizer/touch glass lenses and is also fit for refurbishing screens.
• It would make assembling or refurbishing more wonderful, you just press the start button, and the systems will auto-remove the bubbles after lamination, it is not only convenient to repair, but also saves you time and cost.
• It should be one of repairment facilitating devices.
• This Bubble Remover Machine is widely used for LCD repair for iPhone Samsung as well as other mobile phones, it can completely remove the bubbles.\nUsing pressure and temperature to remove air bubbles generated in the bonding process, this program will increase the adhesion strength between different material bubbles with high pressure, with no damage to LIQUID CRYSTAL
• CE Certification,  100% No Bubble
• Manual control, automatic removal: temperature, time, and pressure can be set
• Work for all mobile phones with LCD screen size is 10 inches or below

USER GUIDE

Equipment Installation and Debugging Procedures

1. Connect the pressure regulator
2. Connect the power socket
3. Open the power switch
4. Lose the emergency stop button
5. Let the cover of the equipment upright and put it into the working chamber
6. Close the upper cover
7. Tighten the four fixing-nuts
8. Click the start button; the start light on
9. Waiting for 10mins; the start button light off
10. Take out the product, the procedure is completed

Process (Pressure Screen)

• Then LCD panel in the working chamber must keep the cover upright.
• When the back of the LCD screen has a protuberant uneven row line, it needs to be flattened before fitting.
• The front of the laminating process (with OCA LCD cover ); can't leave air sealing between the cover and the LCD screen.
• The machine cylinder heating, fan circulating air, heating Express, efficient a bubble, you can set the time automatically control the temperature accurately.
• Manual fast opening and pressure adjustable, automatic, manual pressure relief, pressure differential auto exhaust.
• Is a high-quality, safe, durable new bubble machine.