Description

Mechanic Dw50 1015 Desolder Wire 10pcs Set

The MECHANIC DW50 1015 Desolder Wire 10pcs Set is a collection of desoldering braids used for removing solder from electronic components and circuit boards. Here are the primary uses and benefits of this set:

1. Desoldering Components: Ideal for removing soldered components from PCBs (Printed Circuit Boards) by effectively absorbing molten solder.

2. Repair and Rework: Essential for repairing or modifying electronic circuits, helping to remove excess solder or defective components without damaging the board.

3. Cleaning Solder Pads: Ensures clean and solder-free pads on a PCB, providing a proper surface for re-soldering new components.

4. Maintenance: Useful for regular maintenance and troubleshooting of electronic devices, allowing for easy component replacement and circuit adjustments.

5. Prototype Development: Facilitates modifications and changes in prototypes during the development phase, making it easier to test and refine electronic designs.

Benefits:

• High Quality: Made from fine copper braid, which provides excellent thermal conductivity and solder absorption.
• Flux Coating: The wire is coated with flux to enhance its solder-wicking capabilities, making the desoldering process more efficient.
• Variety: The set includes multiple pieces, ensuring you have enough desoldering wire for various projects and repairs.

How to Use:

1. Heat the Solder Joint: Use a soldering iron to heat the solder joint you wish to remove.
2. Place the Desolder Wire: Position the desolder wire over the heated solder joint.
3. Absorb the Solder: Allow the wire to absorb the molten solder by maintaining contact with the heated area.
4. Remove the Wire: Once the solder has been absorbed, remove the desolder wire and trim the used portion.

This set is a valuable tool for hobbyists, technicians, and engineers involved in electronics assembly, repair, and prototyping.

MECHANIC Strong Solder Wick Desoldering Mesh Wire 1.0 1.5M Length BGA Tin Remover Welding Soldering Tools

Description:

-Type: super strong solder wick remover

-Material: Copper

-Length: 1.5m

-Width: 1.0mm 1.5mm 2.0mm 2.5mm 3.0mm 3.0mm

-Feature: anti-oxidation, anti-corrosion.

-Function: Used to remove excess solder and PCB tin.

Packing Details:

* 10PcsxMECHANIC DW50 1015 DESOLDER WIRE