Description

MECHANIC 6MM HIGH-TEMPERATURE RESISTANT TAPE

Brand:- Mechanic
Colour:- Metallic Brown
Material:- Polyimide, Silicone
Number of Items    ‎1
Recommended Uses For Product:-‎Sublimation
Size:-6mm
Tensile Strength:- ‎75 Pounds
Item Weight:- ‎10 g
Package Dimensions:- ‎14.7 x 11.1 x 1.4cm
Heat Resistance Polyimide Tape High Thermal Sublimation Tape Sticker Ultra 
Strong Adhesive 30-meter long heat Resistant up to 280°C
High Temperature Resistance: The mechanic Heat Resistance Polyimide 
High Thermal Tape has a heat resistance of up to 280C. The Tape works well in 
protecting electronic products, Frequency Conversion, Sublimation, 
electric motor, soldering, as well as painting, packing fixing, 3D 
printing, Splicing Wires, printing PCB circuit board Semi-Conductor 
manufacturing.
Multi-size Tape available: The mechanic Heat Resistance tape is 
available in 6 different widths 3- 6 – 10 –12 – 20 – 25 mm or a
 Multi-Pack Each roll is 30 meters in Length.
High-Quality Protection: Included Antistatic Tweezer. 
The ESD Heat Resistance Polyimide High Thermal Tape is made of polyimide 
film with silicone adhesive. Therefore the Superior performance of the heat
resistant and the strong silicone adhesive makes this heat-transfer tape 
easy to stick and no residue on the surface after peeling off.

High-Quality Product By Mechanics: Each part is tested before shipment
ProTape pro 950 polyimide film tape. It is ideally suited for 
continuous high-temperature operating conditions. It is used as 
a ground, barrier, and phase insulation in high-performance toroidal 
coils, and high-frequency motors. It can be used for end-turn bundling 
and connection insulation in small motors. It is also used for 
cross-over insulation and out wraps on bobbin wound and form wound
 coils for large rotating machines to bundle conductors and reinforce
 insulation and it can also be used as wave solder masking of printed 
circuit boards. It combines a thin conformable backing with outstanding
 puncture, tear, and abrasion resistance at high-temperature levels. 
Thermosetting adhesive provides solvent resistance and outstanding 
high-temperature adhesion. Features include good adhesion, good 
tensile strength, low-temperature application, short-term, high-temperature resistance, clean removal, good chemical and solvent
resistance, UV resistance, easy unwinding, good abrasion and moisture
resistance, and waterproof backing. Applications include surface 
protection, powder-coated surfaces, splicing, coil wrap banding, 
and ciruit board protection. Polyimide film/kapton backing. 
1-millimeter backing thickness (D-3652). 2.5-millimeters
total tape thickness (D-3652). 24 pounds per inch tensile 
strength (D-882-91). 50 Percent elongation (D-882-91). 
20 ounces per inch adhesion to steel (D-3330). 7500 Volts 
dielectric strength (D-149-97). 500-degree F oven residue
 testing temperature resistance. 350 degrees F/180 degree 
C insulation class, centigrade.

High Temp Tape is made from polyimide film with silicone adhesive. They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 260°C (500°F).

For applications where extremes of heat and vibration are the norm, designers rely on it because of its ability to maintain its unique combination of mechanical properties under the harshest of conditions.